[WIP][Dolly i3] Cubieboard1/2 Case

Got some sweet designs to share?
Post Reply
Moorviper
Posts: 50
Joined: Wed May 24, 2017 1:19 pm

[WIP][Dolly i3] Cubieboard1/2 Case

Post by Moorviper » Mon Aug 07, 2017 10:25 pm

Hi, i am currently working on a Case for the Cubieboard (for Octoprint)
It is based on slippyr4 case on thingiverse.
model.jpg
model.jpg (143.65 KiB) Viewed 158 times
placed.jpg
placed.jpg (117.45 KiB) Viewed 158 times
printstarted.jpg
printstarted.jpg (104.03 KiB) Viewed 158 times
testprint is running and is also a good bridge test XD

Moorviper
Posts: 50
Joined: Wed May 24, 2017 1:19 pm

Re: [WIP][Dolly i3] Cubieboard1/2 Case

Post by Moorviper » Mon Aug 07, 2017 10:48 pm

It's funny i am printing with the false settings
(settings for 0.8 nozzle / 0.4 nozzle in)

but it comes out not sooo bad :D
2017-08-07 22.46.09.jpg
2017-08-07 22.46.09.jpg (125.31 KiB) Viewed 156 times

slippyr4
Posts: 109
Joined: Thu Jun 15, 2017 10:24 am

Re: [WIP][Dolly i3] Cubieboard1/2 Case

Post by slippyr4 » Tue Aug 08, 2017 8:47 am

Why are you printing with that orientation? It should lie flat on its back.
Self-built Prusa i3 MK2 clone
My things: https://www.thingiverse.com/slippyr4/designs
My Prusa firmware port for ramps & MKS : https://github.com/slippyr4/Prusa-Firmware

Moorviper
Posts: 50
Joined: Wed May 24, 2017 1:19 pm

Re: [WIP][Dolly i3] Cubieboard1/2 Case

Post by Moorviper » Tue Aug 08, 2017 1:42 pm

This was a test how the Cubieboard fit.
In this orientation i printed only the part which i needed to check that and the print was faster.

CliftonTes
Posts: 1
Joined: Wed Sep 20, 2017 2:06 pm

Re: [WIP][Dolly i3] Cubieboard1/2 Case

Post by CliftonTes » Sun Oct 01, 2017 11:01 am

That's not bad at all. Are you working on anything else similar?

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest