FALLO ANYCUBIC PHOTON

Anything goes! Cheap or expensive, FDM or SLA, DIY or Commercial.
Post Reply
Danicnv
Posts: 2
Joined: Mon Jul 30, 2018 9:27 pm

FALLO ANYCUBIC PHOTON

Post by Danicnv » Mon Jul 30, 2018 9:31 pm

Good as such. Let me introduce myself, I am Dani, I decided to buy my first 3d printer, the ANYCUBIC PHOTON.

And here I bring my problem, the design of the cube that brings by default is printed perfectly (ruling out any possible error of the machine), but the designs that I insert, whether purchased, downloaded for free or made by me, always they come "crushed".

I have not yet written to the technical service, after writing here it would be the next step.

I show you some comparative images of the digital version and the real version of the pieces, to see if anyone could help me since after several tests I do not see the light.
Attachments
IMG_20180730_093756.jpg
IMG_20180730_093756.jpg (28.02 KiB) Viewed 207 times
IMG_20180730_093717.jpg
IMG_20180730_093717.jpg (22.49 KiB) Viewed 207 times
CUERPO_ORCO_WARC.png
CUERPO_ORCO_WARC.png (234.6 KiB) Viewed 208 times

Danicnv
Posts: 2
Joined: Mon Jul 30, 2018 9:27 pm

Re: FALLO ANYCUBIC PHOTON

Post by Danicnv » Tue Jul 31, 2018 10:24 pm

Solved, the problem is that I like to touch more of the account without reading, in the look ratio part you have to leave the parameters as they come standard (x 68.04, y 120.96, z 150).

There is no point in being allowed to touch something that, in doing so, distorts the impression. Reading the manual on this, indicates that normally it should be left factory but for larger impressions that come out of some axis can be changed (this escapes me) but for now I will not need to leave any axis so fixed.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest