Prusa i3 Clone Build Log

Anything goes! Cheap or expensive, FDM or SLA, DIY or Commercial.
EugenioFructuoso
Posts: 6
Joined: Wed Jun 21, 2017 7:37 pm

Prusa i3 Clone Build Log

Post by EugenioFructuoso » Wed Jun 21, 2017 8:28 pm

HI all.
First sorry my poor english, i´m from Spain.

im trying to build a Prusa mk2 clone following thomas guide.

I'm going to need some help for some doubts I have

But first i want to show you what i have so far.

Frame:
i could buy a cheap aluminium frame on Ebay. 35€
I think is the BQ hephestos frame.
Image

Screws, nuts and rods
I buy all the necessary screws and nuts, and 2 meter of threaded rods, 8 and 10 mm.
18€ including the case.
Image
Image
Image


Things bought and waiting for them to arrive:

Electronics Kits MEga2560 https://es.aliexpress.com/item/3D-Print ... 0.0.4vbPgt 19,95€

2xCouplers https://es.aliexpress.com/item/3D-Print ... 0.0.4vbPgt 2,48€

2x2m Belt 16mm https://es.aliexpress.com/item/Hot-sale ... 0.0.4vbPgt 2,83€

2xGT2 Pulleys https://es.aliexpress.com/item/GT2-Pull ... 0.0.4vbPgt 1,82€

2xgt2 pulleys https://es.aliexpress.com/item/Sale-2Pc ... 0.0.4vbPgt 2,54€

4xendstop https://es.aliexpress.com/item/1PCS-Hig ... 0.0.4vbPgt 1,82€

Heatbed mk2b 3mm aluminium https://es.aliexpress.com/item/1Pcs-lot ... 0.0.4vbPgt 13,65€

Extruder https://es.aliexpress.com/item/Improved ... 0.0.4vbPgt 5,84€

e3d v6 clone bowden https://es.aliexpress.com/item/3D-Print ... 0.0.XXQJmQ 5,89€

12xLM8UU 8mm linear ball bearing https://es.aliexpress.com/item/12-pcs-l ... 0.0.XXQJmQ 5,32€

This is all i have for now.

I will print all the parts in a xheap tronxy p802m with this ABS
Image

Im having some warping issues but i think i will get it.

So, i´m a bit confused with the lengths of threaaded rods and smooth rods.
Smooth rods:
Original lenghts are 320,330 and 370 but Thomas use 320,350 and 370. Why? Z,Y,X??

Threaded rods:
Original:
4 pcs M8x200mm
2 pcs M10x350mm

Thomas use 4 m8x205mm and 2 m10x360mm

Why?


I hope you can help me and I like the thread. More soon
Thanks

chumm
Posts: 176
Joined: Thu Jun 15, 2017 11:24 am

Re: Prusa i3 Clone Build Log

Post by chumm » Thu Jun 22, 2017 12:02 am

Just to confirm, you are using a different type of extruder than the Dolly was designed with. Your Bowden extruder can work, but you'll need to modify the extruder-body.stl file to remove the motor mount and hole for the tube so you can attach the Bowded tube adapter to the top of your hotend. You'll also need to find a point on the frame to mount it, which may mean drilling new holes.
EugenioFructuoso wrote:
Wed Jun 21, 2017 8:28 pm
So, i´m a bit confused with the lengths of threaaded rods and smooth rods.
Smooth rods:
Original lenghts are 320,330 and 370 but Thomas use 320,350 and 370. Why? Z,Y,X??
The old I3 kits used 320/350/370, so it is easy to find those sets already package together on Aliexpress. Tom included a modified Y-Corner file that is open on top to allow the longer Y rods (350) to be used. 320/330/370 are the correct lengths.
EugenioFructuoso wrote:
Wed Jun 21, 2017 8:28 pm
Threaded rods:
Original:
4 pcs M8x200mm
2 pcs M10x350mm

Thomas use 4 m8x205mm and 2 m10x360mm

Why?
200mm and 350mm is the right fit, the 205/360 do stick out slightly on the Dolly as you can see on mine. Slightly longer is maybe easier to get a better thread on the nut, but it should make little difference.
Image

EugenioFructuoso
Posts: 6
Joined: Wed Jun 21, 2017 7:37 pm

Re: Prusa i3 Clone Build Log

Post by EugenioFructuoso » Sat Jun 24, 2017 2:49 am

Thanks chumm ¡¡ now understand clearly. im new to 3dprinting and not familiarized with the prusa design.
chumm wrote:
Thu Jun 22, 2017 12:02 am
Just to confirm, you are using a different type of extruder than the Dolly was designed with. Your Bowden extruder can work, but you'll need to modify the extruder-body.stl file to remove the motor mount and hole for the tube so you can attach the Bowded tube adapter to the top of your hotend. You'll also need to find a point on the frame to mount it, which may mean drilling new holes.
Yes, mi intention is to use a bowden extruder. i will use a Xcarriage designed for bowden.
About drilling new holes is not planned yet, i go along...

Some photos:
Image
Image
Image
Image
Image
Image
Image
Image

More soon

EugenioFructuoso
Posts: 6
Joined: Wed Jun 21, 2017 7:37 pm

Re: Prusa i3 Clone Build Log

Post by EugenioFructuoso » Sun Jun 25, 2017 2:15 pm

hi, almost all the printer parts are ready. now i have to wait for hardware from china...

All part printed in ABS with 35%infill.
I'm happy because no part has warping or any issue.
Image
Image
Image
Image
Image
Image

For some part like the PSU i will use printed part from: http://www.makerfr.com/en/imprimante-3d/i3-r/

chumm
Posts: 176
Joined: Thu Jun 15, 2017 11:24 am

Re: Prusa i3 Clone Build Log

Post by chumm » Mon Jun 26, 2017 3:42 am

Nice prints and nice pictures! Waiting for Chinese deliveries is always the hardest part :lol:

EugenioFructuoso
Posts: 6
Joined: Wed Jun 21, 2017 7:37 pm

Re: Prusa i3 Clone Build Log

Post by EugenioFructuoso » Sat Jul 15, 2017 11:58 pm

Hi ¡ A lot of work and fun this weekend.
With all the parts needed to build the dolly... this is what happened...

Still need alot of work, all the wiring and electronics and some fine tuning.

Image

My smooth rods on Y-axis are 340mm long
Image

First i print the x-motor and x-idler parts from mk2s and yesterday I realized that they were not worth to put the keystone screw so i made new one from makerfr.com but i add the support for the new endstop.
Image

Image

Too many problems with x-carriage, the first printed thigtened the bearing too much and did not have a smooth movement , the second i printed was better but I'm not convinced, maybe design a new one
Image

Image

I design this part for the extruder.
Image

The power supply box is from makerfr.com but modified to allow my plug and switch

Image

I realized that the original prusa part dont touch the ground so i decided to modify it. i think make more sturdy structure.

Image

Image

Image

Need to find other screws for the bed
Image

Image

Image

Image

Image

Endstop cover i design.
Image

If anyone want some of the STL i modified...ask for them.

chumm
Posts: 176
Joined: Thu Jun 15, 2017 11:24 am

Re: Prusa i3 Clone Build Log

Post by chumm » Sun Jul 16, 2017 3:52 am

This looks really nice! Your wiring is so clean and tidy, I really like the extruder mount too. Are you going to use a sensor for bed leveling?

slippyr4
Posts: 224
Joined: Thu Jun 15, 2017 10:24 am

Re: Prusa i3 Clone Build Log

Post by slippyr4 » Sun Jul 16, 2017 9:13 am

Which extruder parts did you print? Do you have a link?
Self-built Prusa i3 MK2 clone
My things: https://www.thingiverse.com/slippyr4/designs
My Prusa firmware port for ramps & MKS : https://github.com/slippyr4/Prusa-Firmware

ronka
Posts: 41
Joined: Thu Jun 15, 2017 4:00 am
Location: Holland

Re: Prusa i3 Clone Build Log

Post by ronka » Sun Jul 16, 2017 9:00 pm

Hi,
Did you wrap the frame in carbonsticker? Looks nice.

The printer on your workbench on the right of the one youre building is bigger, but what's the type?

dan3008
Posts: 34
Joined: Sun Jul 09, 2017 4:52 pm

Re: Prusa i3 Clone Build Log

Post by dan3008 » Sun Jul 16, 2017 10:19 pm

Buena construcción. Me gusta mucho la apariencia de fibra de carbono


Sorry, My ex is 1/2 Spanish, so I know a bit of (poor) conversational Spanish lol

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests