Serial Com Error Anycubic Kossel. Any Ideas?

Anything goes! Cheap or expensive, FDM or SLA, DIY or Commercial.
Post Reply
User avatar
RyanCheape
Posts: 1
Joined: Sun Aug 12, 2018 10:12 pm

Serial Com Error Anycubic Kossel. Any Ideas?

Post by RyanCheape » Sun Aug 12, 2018 10:14 pm

(This was posted on Repetier Forums and Reddit as well)

Hello, I have Anycubic Upgraded Linear Kossel and have been getting this error when connecting.

14:06:38.816 : Serial com error:System.IO.Ports.SerialErrorReceivedEventArgs

I've checked my baud rate in RH and it's at 250000, same as in Repetier firmware and what Anycubic recommends.
I've also tried messing with the relative cache size and changing out usb cords, both to no avail.

I'm not able to send movement g-code, (sending something such as G1X0Y0Z0 and nothing happens at all) which is probably due to this issue. Also, there is a debug light flashing on the board when starting up the printer. I am able to home the printer and use manual controls in Repetier, however.

I have read many forums on this issue and nothing seems to be working for me...

Any ideas on how to fix this? Thanks.

Heres my log.

14:06:38.816 : Serial com error:System.IO.Ports.SerialErrorReceivedEventArgs
14:06:38.817 : Printer reset detected - initalizing
14:06:38.817 : start
14:06:38.829 : Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000
14:06:40.095 : zDistortionCorrection:0
14:06:40.100 : Free RAM:1287
14:06:40.100 : Autoretract:0
14:06:40.102 : X:0.00 Y:0.00 Z:0.000 E:0.0000
14:06:40.102 : SelectExtruder:0
14:06:40.119 : FIRMWARE_NAME:Repetier_1.0.0dev FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Delta EXTRUDER_COUNT:1 REPETIER_PROTOCOL:3
14:06:40.119 : Cap:PROGRESS:1
14:06:40.119 : Cap:AUTOREPORT_TEMP:1
14:06:40.119 : Cap:EEPROM:0
14:06:40.119 : Cap:AUTOLEVEL:1
14:06:40.119 : Cap:Z_PROBE:1
14:06:40.119 : Cap:SOFTWARE_POWER:1
14:06:40.119 : Cap:TOGGLE_LIGHTS:0
14:06:40.119 : Printed filament:2.76m Printing time:0 days 1 hours 20 min
14:06:40.119 : PrinterMode:FFF
14:06:40.125 : X:0.00 Y:0.00 Z:0.000 E:0.0000
14:06:40.126 : DebugLevel:6
14:06:40.129 : SelectExtruder:0
14:06:40.132 : Begin file list
14:06:40.132 : End file list
14:06:40.141 : DebugLevel:6
14:06:40.144 : SelectExtruder:0
14:06:58.343 : Serial com error:System.IO.Ports.SerialErrorReceivedEventArgs
14:06:58.343 : Printer reset detected - initalizing
14:06:58.343 : start
14:06:58.356 : Transformation matrix: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000
14:06:59.623 : zDistortionCorrection:0
14:06:59.626 : Free RAM:1287
14:06:59.626 : Autoretract:0
14:06:59.628 : X:0.00 Y:0.00 Z:0.000 E:0.0000
14:06:59.628 : SelectExtruder:0
14:06:59.646 : FIRMWARE_NAME:Repetier_1.0.0dev FIRMWARE_URL:https://github.com/repetier/Repetier-Firmware/ PROTOCOL_VERSION:1.0 MACHINE_TYPE:Delta EXTRUDER_COUNT:1 REPETIER_PROTOCOL:3
14:06:59.646 : Cap:PROGRESS:1
14:06:59.646 : Cap:AUTOREPORT_TEMP:1
14:06:59.646 : Cap:EEPROM:0
14:06:59.646 : Cap:AUTOLEVEL:1
14:06:59.646 : Cap:Z_PROBE:1
14:06:59.646 : Cap:SOFTWARE_POWER:1
14:06:59.646 : Cap:TOGGLE_LIGHTS:0
14:06:59.646 : Printed filament:2.76m Printing time:0 days 1 hours 20 min
14:06:59.646 : PrinterMode:FFF
14:06:59.651 : X:0.00 Y:0.00 Z:0.000 E:0.0000
14:06:59.652 : DebugLevel:6
14:06:59.655 : SelectExtruder:0
14:06:59.658 : Begin file list
14:06:59.658 : End file list
14:07:00.713 : SelectExtruder:0
14:07:00.715 : X:0.00 Y:0.00 Z:304.275 E:0.0000
14:07:00.721 : DebugLevel:6
14:07:00.724 : SelectExtruder:0

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest