Show your printer(s)

Anything goes! Cheap or expensive, FDM or SLA, DIY or Commercial.
BartStar
Posts: 1
Joined: Sun Aug 20, 2017 1:14 am

Re: Show your printer(s)

Post by BartStar » Sun Aug 20, 2017 1:32 am

Nothing much to say about this thing but that it squirts plastic and can print for hours and hours.
2.jpg
2.jpg (724.21 KiB) Viewed 894 times
1.jpg
1.jpg (601.97 KiB) Viewed 894 times

Prusa I2 currently under construction. I hope to have it finished by December. I have a Rambo controller
and heat bed on order. I’m really looking forward to using this printer. I know its going to produce some
great prints.
3.jpg
3.jpg (743.27 KiB) Viewed 894 times

User avatar
lowfat
Posts: 30
Joined: Thu Jun 15, 2017 3:36 am

Re: Show your printer(s)

Post by lowfat » Sun Aug 27, 2017 6:13 pm

My only functioning printer. E3D V6 w/ amplified PT100. 300x200mm bed. MKS SBase 1.3. DIY Titan extruder. 0.9 degree X and Y steppers. Enclosure is a temperature controlled and auto on/off heated enclosure. Although even w/ polycarbonate I never found I needed to turn the heaters on. So I've removed all the wiring that connected to the printer.

Image

Image

I'm currently building a reinforced frame for this printer and will be converting it to a single Z motor. Also have a Wilson 2 95% finished (also single Z motor). Just waiting for the closed loop belts to arrive (been 2 months already).

User avatar
lowfat
Posts: 30
Joined: Thu Jun 15, 2017 3:36 am

Re: Show your printer(s)

Post by lowfat » Fri Oct 20, 2017 8:10 pm

Finished building another 'Prusa'.
200x300x185mm build space.
E3D V6 + 0.6mm nozzle.
E3D Titan
Nidec hotend fan and Sunon MagLev part cooling fan.
Single Z-motor w/ 1:2 gearing.
MKS SBase 1.3
Raspberry Pi Zero W

Image

Image

Image

Image

Image

Image

Image

Image

Tal_Esh
Posts: 3
Joined: Sun Oct 15, 2017 10:29 pm

Re: Show your printer(s)

Post by Tal_Esh » Sun Nov 12, 2017 6:19 pm

Neolog wrote:
Thu Jun 15, 2017 12:47 am
This my printer...no more bearing or wheel to stuck in cat hair....DIY slider made in POM Acetal...smooth and silent....
https://www.youtube.com/watch?v=uEGGJ46uYGw&t=18s
That's awesome! Could you share some info about those sliders?

User avatar
NestorPomar
Posts: 1
Joined: Wed Nov 15, 2017 6:00 pm

Re: Show your printer(s)

Post by NestorPomar » Wed Nov 15, 2017 6:29 pm

This is my prusa frankeinstein, each piece from different supplier and I did plenty of improvements during the four years I am working on it.
Now it runs a E3d v6 hot end with a titan extruder and an Ir Z probe.
The next improvement is a multimaterial hotend, it's a mix between a Chinese hotend and original E3d chimera pieces. The approach will be the same of the make multimaterial solution but not a more compact shape... We will see if it will work. ;)
Attachments
IMG_20171115_180520.jpg
IMG_20171115_180520.jpg (3.49 MiB) Viewed 697 times
IMG_20171115_180549.jpg
IMG_20171115_180549.jpg (3.38 MiB) Viewed 697 times
IMG_20171115_180542.jpg
IMG_20171115_180542.jpg (3.41 MiB) Viewed 697 times

taranis
Posts: 1
Joined: Wed Nov 15, 2017 7:04 pm

Re: Show your printer(s)

Post by taranis » Wed Nov 15, 2017 7:21 pm

Thats my setup. Lovly Anycubic Kossel & my baby: A bq prusa i3 Hephestos with "some" modifications :-)
Attachments
IMG_20170527_160651_357.jpg
IMG_20170527_160651_357.jpg (124.29 KiB) Viewed 689 times

User avatar
MarkHobbs
Posts: 2
Joined: Wed May 24, 2017 11:22 am

Re: Show your printer(s)

Post by MarkHobbs » Wed Nov 15, 2017 7:42 pm

I have a self build P3Steel XL running on a DuetWifi with a titan extruder, e3D hot endand a BLTouch like probe for bed levelling. It sits in an insulated heat chamber that’ll reach 50c from only the Heated bed at 115c.
84176068-2400-4918-A9BE-2E9D6215AAEA.jpeg
84176068-2400-4918-A9BE-2E9D6215AAEA.jpeg (2.42 MiB) Viewed 689 times
I’m also completing an SLA LCD 3D Printer of my own design
2491F60C-BCD2-42B6-A29B-17783C6B1613.jpeg
2491F60C-BCD2-42B6-A29B-17783C6B1613.jpeg (633.91 KiB) Viewed 689 times
This Christmas I plan on converting this Makerbot 5th Gen replicator into a useful CoreXY machine replacing the electronics with a DuetWifi and new hot end/extruder.
4B18BF98-BD77-4B68-A7FA-3B7BC7C0BB94.jpeg
4B18BF98-BD77-4B68-A7FA-3B7BC7C0BB94.jpeg (2.71 MiB) Viewed 689 times
I’m also inheriting an Ormerod soon.

And last but not least, I am waiting on a Kodama Obsidian Deluxe in Black that I kickstarted :p

User avatar
PeteAllum
Posts: 1
Joined: Wed Nov 15, 2017 7:55 pm

Re: Show your printer(s)

Post by PeteAllum » Wed Nov 15, 2017 8:10 pm

IMG_20170412_160906.jpg
My LulzBot Mini
IMG_20170412_160906.jpg (2.95 MiB) Viewed 687 times
The day my LulzBot Mini was delivered!
Have since invested in an acrylic case and a Flexystruder to print with flexible filament. Have also added a Raspberry Pi to use Octoprint and LED lighting to make it much easier to see the print bed and to allow for a future remote camera upgrade.

User avatar
alexandre.cliche
Posts: 1
Joined: Thu Nov 16, 2017 12:37 am

Re: Show your printer(s)

Post by alexandre.cliche » Thu Nov 16, 2017 12:47 am

My printer is an Alunar M505. Same as ANET A8. Most peoples would say that all the upgrades Ive made doesn't worth it and that I should just have bought a CR-10. But I very like my printer and I've learn so much in the process of pimping it. It's linked with Octoprint via a raspberry pi 3.

Alexandre Cliche
Attachments
20170712_104059.jpg
20170712_104059.jpg (3.54 MiB) Viewed 676 times

mgalamba
Posts: 2
Joined: Thu Sep 21, 2017 9:55 pm

Re: Show your printer(s)

Post by mgalamba » Thu Nov 16, 2017 2:05 am

Thanks to Hewlett Packard & Epson..... Mega+RAMPS. ...
20170627_032634.jpg
20170627_032634.jpg (2.74 MiB) Viewed 673 times
20170627_033217.jpg
20170627_033217.jpg (2.87 MiB) Viewed 673 times
Thanks to Tom and his excellent guides!!!!!!
Currently working on a New design. ... from scratch

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest