Best 3D Youtube Videos

Discuss the Forums themselves - what's working for you and what isn't
i3-guy
Posts: 52
Joined: Fri Jun 16, 2017 1:55 pm

Best 3D Youtube Videos

Post by i3-guy » Fri Jun 16, 2017 2:04 pm

It would be cool to see a section for new videos that are 3D print related.

I have subscriptions, but many times there are old videos that are super useful but the channel is no longer active.

The content is still valuable and you will never stumble across them.

i3-guy
Posts: 52
Joined: Fri Jun 16, 2017 1:55 pm

Re: Would like to see section for 3D YouTube vids.

Post by i3-guy » Fri Jun 16, 2017 7:14 pm

This is one of my favorite 3d printing vids.... using a brush kit to nickel plate a 3D print.

https://www.youtube.com/watch?v=ilWst2z ... e=youtu.be

oakdesign
Posts: 109
Joined: Thu Jun 15, 2017 10:21 am

Re: Would like to see section for 3D YouTube vids.

Post by oakdesign » Fri Jun 16, 2017 8:08 pm

i3-guy don't understand your request. Just the next section is called "YouTube", so already there.
As this place quite new brand new might take a few days until filled with content,

Regards Richard
Opa's bester Rat: Probieren geht über Studieren, Grandpas best advice: the proof of the pudding is in the eating

Online
User avatar
kojote
Site Admin
Posts: 113
Joined: Sun May 21, 2017 9:27 pm
Location: Munich, Germany
Contact:

Re: Would like to see section for 3D YouTube vids.

Post by kojote » Fri Jun 16, 2017 9:29 pm

I'll make you an offer - give me enough solid content for a month and you get a section and I move the content there :)
Lvl 52 Nerd, Dad of seven, Senior WebDeveloper, in 3DP since 2012 (Ultimaker 1)

Support Tom on Patreon! https://www.patreon.com/toms3dp
All details and more links at https://toms3d.org/support-me/
All of Toms video gear https://toms3d.org/my-gear

i3-guy
Posts: 52
Joined: Fri Jun 16, 2017 1:55 pm

Re: Would like to see section for 3D YouTube vids.

Post by i3-guy » Fri Jun 16, 2017 10:50 pm

Having the YouTube section under meta means it is just a suggested topic vs. main regular topic, correct?


i3-guy
Posts: 52
Joined: Fri Jun 16, 2017 1:55 pm

Re: Would like to see section for 3D YouTube vids.

Post by i3-guy » Thu Jun 22, 2017 3:39 pm

Here another to add to the collection.

3D Printing mistakes to avoid:
https://www.youtube.com/watch?v=aWg1nG2AbA8

i3-guy
Posts: 52
Joined: Fri Jun 16, 2017 1:55 pm

Re: Would like to see section for 3D YouTube vids.

Post by i3-guy » Sat Jun 24, 2017 3:36 am

Great vid on what slicer variables to change speed of printing an object.
https://www.youtube.com/watch?v=vzVAyw2rRZ4&t=23s

i3-guy
Posts: 52
Joined: Fri Jun 16, 2017 1:55 pm

Re: Would like to see section for 3D YouTube vids.

Post by i3-guy » Sat Jun 24, 2017 3:46 am

Good vid on tools you need to get into 3D printing:
https://www.youtube.com/watch?v=hqg1OWhWw3g

Cool test on 3D printed nylon gear in RC car
https://www.youtube.com/watch?v=PDU09B59YFQ

Good vid on hacking firmware on the Monoprice select mini
https://www.youtube.com/watch?v=T-o-ibGUEoA

i3-guy
Posts: 52
Joined: Fri Jun 16, 2017 1:55 pm

Re: Would like to see section for 3D YouTube vids.

Post by i3-guy » Sun Jun 25, 2017 12:50 pm

Heat testing of different filaments after annealing
https://www.youtube.com/watch?v=vLrISrkg46g

Nice vid on getting OctoPrint running from scratch
https://www.youtube.com/watch?v=4A509rS1zOE

Vid on running Astroprint ( OctoPi for people who don't want to worry about router security settings)
https://www.youtube.com/watch?v=HRcPJNh3Rwk
https://www.youtube.com/watch?v=8iLAsUZPl1Q

Vid on useful things to print
https://www.youtube.com/watch?v=BPzwHltYtQs

vid using 3D parts at Volkswagen
https://www.youtube.com/watch?v=Z9_vIulHyfg

vid on using using tinkercad, including adding chamfers
https://www.youtube.com/watch?v=G7RjHgzJGA8

Huge eagle print on CR-10 (TLDR: Fast forward to 6:42)
https://www.youtube.com/watch?v=iyDOv4MfEPs

Pallette: Machine that splices filaments from different spools into 1 to change any printer into a multicolor printer.
https://www.youtube.com/watch?v=uecY5ikWdCI&t=26s

Nice build that combines CNC with 3D printer
https://www.youtube.com/watch?v=qJfYTv88YvI

Replacing Melzi board with a Smoothie
https://www.youtube.com/watch?v=QDNocu2MLpc

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests