Search found 4 matches

by Jan19998
Tue Oct 16, 2018 8:14 pm
Forum: Help requests / Purchasing assistance
Topic: Gaps between perimeter and top solid infill
Replies: 8
Views: 3582

Re: Gaps between perimeter and top solid infill

i use cura. the overlap is set to 30% each.

but it has to be a mechanical problem i'm on this problem for a few month and nothing that i changed in cura has helped.
by Jan19998
Mon Oct 15, 2018 8:02 pm
Forum: Help requests / Purchasing assistance
Topic: Gaps between perimeter and top solid infill
Replies: 8
Views: 3582

Re: Gaps between perimeter and top solid infill

Printed again with 100% flow, gaps are still there. Little bit of overextrusion now.

But what could be the mechanical problem? I know it's difficult remotly but maybe someone has another idea.
IMG_20181015_195224.jpg
IMG_20181015_195224.jpg (1.79 MiB) Viewed 3521 times
by Jan19998
Sun Oct 14, 2018 1:53 am
Forum: Help requests / Purchasing assistance
Topic: Gaps between perimeter and top solid infill
Replies: 8
Views: 3582

Re: Gaps between perimeter and top solid infill

I thought there is a rule of thumb that you put your line width on 120% of the nozzle size. Outer wall thickness is the same as line width. Changed a few settings. Gone to .4mm line width and changed speeds a little bit and printed again. Line Width .4mm Flow 90% Filament 1,745mm IMG_20181013_214230...
by Jan19998
Sun Oct 07, 2018 9:26 pm
Forum: Help requests / Purchasing assistance
Topic: Gaps between perimeter and top solid infill
Replies: 8
Views: 3582

Gaps between perimeter and top solid infill

I have the following problem with my Anet A8. There are gaps around but mostly on the right of holes. They are between the perimeter and the top solid infill. Another thing i have found out is that this problem only occurs at a height of up to 5mm. I think it is a mechanical problem but i have no id...