Search found 42 matches

by mesnik
Wed Feb 14, 2018 8:21 am
Forum: Software
Topic: Marlin with: MKS GEN 1.4 + TMC2130
Replies: 34
Views: 28848

Re: Marlin with: MKS GEN 1.4 + TMC2130

Hi there,


I can't be of much help on this as I am not using the sensorless feature...


Sorry!!


But I keep an eye out here as I would be interested on that as well!!!
by mesnik
Sat Jan 27, 2018 3:51 am
Forum: Hardware
Topic: TMC2130 and motor overheating
Replies: 8
Views: 8518

Re: TMC2130 and motor overheating

I am assuming these ones I have are 0.9A as nothing is written on them...
by mesnik
Sat Jan 27, 2018 3:40 am
Forum: Hardware
Topic: TMC2130 and motor overheating
Replies: 8
Views: 8518

Re: TMC2130 and motor overheating

Oakdesign - hello, me again!!

So my motors are overheating as well and I see the problem now...

Which ones are you using? Maybe a link? Thanks!!!
by mesnik
Sun Jan 21, 2018 2:05 am
Forum: Software
Topic: Marlin with: MKS GEN 1.4 + TMC2130
Replies: 34
Views: 28848

Re: Marlin with: MKS GEN 1.4 + TMC2130

Hey Oakdesign! I got the fans to work! I actually hooked up the controller fans AND the extruder fan. So now the extruder fan goes off after the extruder goes down passed 50 deg. It is nice not having to hear the noise while not printing anything. The Titan Aero fan is mounted right no the cooling f...
by mesnik
Tue Jan 09, 2018 10:19 pm
Forum: Software
Topic: Marlin with: MKS GEN 1.4 + TMC2130
Replies: 34
Views: 28848

Re: Marlin with: MKS GEN 1.4 + TMC2130

Nice!!!! And they will operate at 12V, right! Okay, will order a couple and play with it...

Thanks!!!
by mesnik
Tue Jan 09, 2018 1:18 am
Forum: Software
Topic: Marlin with: MKS GEN 1.4 + TMC2130
Replies: 34
Views: 28848

Re: Marlin with: MKS GEN 1.4 + TMC2130

Okay, couple of questions as far as this auto fan... One, at 5v, it doesn't blow too hard... can we switch it to 12v? If using more than one fan, do I hook them up in parallel in the same pin or add another pin to the code? And finally, does it have to be a fan with 3 wires? The one with 2 wires jus...
by mesnik
Mon Jan 08, 2018 10:10 pm
Forum: Software
Topic: Marlin with: MKS GEN 1.4 + TMC2130
Replies: 34
Views: 28848

Re: Marlin with: MKS GEN 1.4 + TMC2130

Thanks!!! That makes it easier... I will report back...
by mesnik
Mon Jan 08, 2018 3:49 am
Forum: Software
Topic: Marlin with: MKS GEN 1.4 + TMC2130
Replies: 34
Views: 28848

Re: Marlin with: MKS GEN 1.4 + TMC2130

Ahh, I am going to try it that way! Fans should be in this week. I will watch his video...and you know me! I will come with questions!!
by mesnik
Mon Jan 08, 2018 3:46 am
Forum: Hardware
Topic: RAMPS, TMC2130s, and LCD
Replies: 34
Views: 9150

Re: RAMPS, TMC2130s, and LCD

Thanks one more for the help. Okay, saga is over!! I got all to work!! I haven’t tried the sd card feature but after moving those pins and adjusting the firmware, the LCD was still blue... so I grabbed another pne I had borrowed from a friend, and guess what? Yep, mine was bad! Now I am waiting for ...
by mesnik
Sun Jan 07, 2018 10:26 pm
Forum: Hardware
Topic: RAMPS, TMC2130s, and LCD
Replies: 34
Views: 9150

Re: RAMPS, TMC2130s, and LCD

@oakdesign... So back at the LCD issue, based on your description of pins and connections, and checking the provided adapter, I see that in AUX3 there are 5 pins common to the LCD and TMCs: 49, 50, 51, 52 and 53. 50 is MISO, 51 is MOSI, and 52 is SCK. Assuming I don't need to move these two, I only ...