MK3 Firmware

3D Modelling, Slicing, Hosts and Management
Veneficus
Posts: 9
Joined: Mon Dec 11, 2017 7:29 pm

MK3 Firmware

Post by Veneficus » Tue Mar 06, 2018 10:41 pm

The most Hardware parts for a Prosa MK3 Clone are available on the Prusa Shop (Pinda2 and Filament Sensor).At the moment I have a look on the MK3 Firmware. And the I have a Problem with the Pinout. Does someone know which function that is and if that works on a mis 1.4 Board with SPI controlled TMC2130 Boards?
#define MOTOR_CURRENT_PWM_XY_PIN 46
#define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 44

User avatar
Moorviper
Posts: 232
Joined: Wed May 24, 2017 1:19 pm
Location: Hessen/Rhön - Germany
Contact:

Re: MK3 Firmware

Post by Moorviper » Wed Mar 07, 2018 2:22 am

Have you links ?
:edit
Have you links for the pinda2 probe in the store ?
Last edited by Moorviper on Wed Mar 07, 2018 1:53 pm, edited 1 time in total.

Veneficus
Posts: 9
Joined: Mon Dec 11, 2017 7:29 pm

Re: MK3 Firmware

Post by Veneficus » Wed Mar 07, 2018 9:18 am

Veneficus wrote:
Tue Mar 06, 2018 10:41 pm
The most Hardware parts for a Prosa MK3 Clone are available on the Prusa Shop (Pinda2 and Filament Sensor).At the moment I have a look on the MK3 Firmware. And the I have a Problem with the Pinout. Does someone know which function that is and if that works on a mks 1.4 Board with SPI controlled TMC2130 Boards?
#define MOTOR_CURRENT_PWM_XY_PIN 46
#define MOTOR_CURRENT_PWM_Z_PIN 45
#define MOTOR_CURRENT_PWM_E_PIN 44

Veneficus
Posts: 9
Joined: Mon Dec 11, 2017 7:29 pm

Re: MK3 Firmware

Post by Veneficus » Wed Mar 07, 2018 11:57 am

links ? Prusa Github there is the Firmware to download

User avatar
Moorviper
Posts: 232
Joined: Wed May 24, 2017 1:19 pm
Location: Hessen/Rhön - Germany
Contact:

Re: MK3 Firmware

Post by Moorviper » Wed Mar 07, 2018 1:54 pm

Sorry :D
Links for the Hardware in the Shop?

Veneficus
Posts: 9
Joined: Mon Dec 11, 2017 7:29 pm

Re: MK3 Firmware

Post by Veneficus » Mon Mar 12, 2018 11:00 am


User avatar
Moorviper
Posts: 232
Joined: Wed May 24, 2017 1:19 pm
Location: Hessen/Rhön - Germany
Contact:

Re: MK3 Firmware

Post by Moorviper » Mon Mar 12, 2018 12:36 pm

ok this link is not public

Veneficus
Posts: 9
Joined: Mon Dec 11, 2017 7:29 pm

Re: MK3 Firmware

Post by Veneficus » Sat Apr 07, 2018 11:13 pm

Done.

MK3 Clone läuft mit Prusa Firmware (aktuelle Version). Der Stealth Modus war ziemlich schwierig auf meine Motoren einzustellen aber er läuft 1a :mrgreen:

darthvader85
Posts: 2
Joined: Fri Dec 15, 2017 11:15 am

Re: MK3 Firmware

Post by darthvader85 » Wed May 23, 2018 11:08 am

Which electronics hardware do you have used to clone the MK3?

babboy
Posts: 3
Joined: Sat May 26, 2018 1:05 pm

Re: MK3 Firmware

Post by babboy » Sat May 26, 2018 1:15 pm

@Veneficus
Kannst mir erzählen wie du es geschafft hast.
aktuell bei mir Folgendes Problem.

XYZ Kalibrierung funktioniert mit Mk42 Bed
Mesh Bed leveling Funktioniert
Pinda2 mit Thermistor funktioniert
Lüfter Fan Mit Tacho Funktioniert

Nur ich kann nicht drucken
Führe ich die erste schicht Kalibrierung durch oder einen anderen Druck
Resetet sich der Drucker nach dem Leveling.
Meine Hardware
MKS Rumba
Firmware Prusa 3.2.1
Mfg babboy

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests