Printable Parts for the MK3 are released

Anything goes! Cheap or expensive, FDM or SLA, DIY or Commercial.
User avatar
Moorviper
Posts: 232
Joined: Wed May 24, 2017 1:19 pm
Location: Hessen/Rhön - Germany
Contact:

Printable Parts for the MK3 are released

Post by Moorviper » Wed Nov 29, 2017 11:55 pm


Monkeh
Posts: 17
Joined: Fri Sep 29, 2017 11:56 pm

Re: Printable Parts for the MK3 are released

Post by Monkeh » Wed Dec 06, 2017 4:34 pm

Looks like they cleaned things up nicely. Shame those Bondtech gears are so expensive.

User avatar
Moorviper
Posts: 232
Joined: Wed May 24, 2017 1:19 pm
Location: Hessen/Rhön - Germany
Contact:

Re: Printable Parts for the MK3 are released

Post by Moorviper » Wed Dec 06, 2017 5:44 pm

50€ for 2 gears is not expensive.

A company i worked for had to pay 130€ for a single screw which was delivered on a palette in a 1,8m height Box full of packaging material.
(shipping is not included @ 130€ ;-) )

Monkeh
Posts: 17
Joined: Fri Sep 29, 2017 11:56 pm

Re: Printable Parts for the MK3 are released

Post by Monkeh » Wed Dec 06, 2017 6:22 pm

It's expensive in that it's a full quarter of what my printer has so far cost!

User avatar
kojote
Site Admin
Posts: 113
Joined: Sun May 21, 2017 9:27 pm
Location: Munich, Germany
Contact:

Re: Printable Parts for the MK3 are released

Post by kojote » Thu Dec 07, 2017 2:06 pm

lovely, thx for sharing
Lvl 52 Nerd, Dad of seven, Senior WebDeveloper, in 3DP since 2012 (Ultimaker 1)

Support Tom on Patreon! https://www.patreon.com/toms3dp
All details and more links at https://toms3d.org/support-me/
All of Toms video gear https://toms3d.org/my-gear

Aziraphale
Posts: 29
Joined: Mon Aug 21, 2017 11:21 am
Location: Wiltshire, UK

Re: Printable Parts for the MK3 are released

Post by Aziraphale » Wed Dec 13, 2017 10:03 am

Awesome, now if only someone would backport the part-cooling fan nozzle to the Mk2, as I've yet to see a convincing equivalent nozzle on Thingiverse (i.e. a nozzle that cools from the sides as well as the front). I'd be all over that ;)

Backporting the 40mm noctua hotend heatsink fan support would be amazing as well! Someone's made something similar, but it has issues with hitting the endstops (which I guess just isn't a problem for the Mk3...)

User avatar
MaxRink
Posts: 40
Joined: Thu Jun 15, 2017 12:25 pm

Re: Printable Parts for the MK3 are released

Post by MaxRink » Fri Dec 15, 2017 7:46 pm

Aziraphale wrote:
Wed Dec 13, 2017 10:03 am
Awesome, now if only someone would backport the part-cooling fan nozzle to the Mk2, as I've yet to see a convincing equivalent nozzle on Thingiverse (i.e. a nozzle that cools from the sides as well as the front). I'd be all over that ;)

Backporting the 40mm noctua hotend heatsink fan support would be amazing as well! Someone's made something similar, but it has issues with hitting the endstops (which I guess just isn't a problem for the Mk3...)
Give me like a day or two :P Prolly going to bastardize my already modified parts in fusion. It isnt that siple bc the mountingpoints for the fan shifted by quite a bit and the cover became ticker and has a completely new screw layout for mounting to the body

User avatar
MaxRink
Posts: 40
Joined: Thu Jun 15, 2017 12:25 pm

Re: Printable Parts for the MK3 are released

Post by MaxRink » Fri Dec 15, 2017 11:43 pm

https://www.thingiverse.com/thing:2717991
still have to test them tho.

User avatar
Moorviper
Posts: 232
Joined: Wed May 24, 2017 1:19 pm
Location: Hessen/Rhön - Germany
Contact:

Re: Printable Parts for the MK3 are released

Post by Moorviper » Sat Dec 16, 2017 12:28 am

the mk52 12v and 24v, the filament sensor and the power outage board are also released

Aziraphale
Posts: 29
Joined: Mon Aug 21, 2017 11:21 am
Location: Wiltshire, UK

Re: Printable Parts for the MK3 are released

Post by Aziraphale » Thu Dec 21, 2017 5:06 pm

MaxRink wrote:
Fri Dec 15, 2017 11:43 pm
https://www.thingiverse.com/thing:2717991
still have to test them tho.
That's pretty cool!

That said, I was hoping for a version of the Mk3 fan nozzle that fits onto an unmodified Mk2 extruder cover, because I've already had to modify my extruder cover, both for the Dolly tweaks (which I think you have extruder cover models for) but also for a BL Touch mount, which no one's done in SCAD yet. I'd have to manually merge a couple of STLs to get an extruder cover that works for the current fan model, sadly, and I already had to merge STLs for my extruder cover which was a pain in the neck and not something I'm too enthusiastic about doing again :(

I need to find someone who knows SCAD well enough to do stuff like this for me, but who will accept relatively small amounts of money in return (like, £10-20 or so per thing) :P I just don't have the time to learn SCAD right now... :(

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests