Autodesk Fusion 3d and Prusa i3

The Prusa i3 was designed by Josef Průša in 2012 with the Prusa i3 MK2 being released in 2016. The Prusa i3's comparable low cost and ease of construction and modification has made it popular in education and with hobbyists and professionals.
Post Reply
Rodolfo Santos
Posts: 1
Joined: Sat Sep 02, 2017 6:12 pm

Autodesk Fusion 3d and Prusa i3

Post by Rodolfo Santos » Sat Sep 02, 2017 6:16 pm

I there. I want to start into 3D. I was thinking about investing on the Prusa i3. I use the autodesk fusion 360 but I don't know if it is compatible with this printer. Can you give me a hand?

Posts: 224
Joined: Thu Jun 15, 2017 10:24 am

Re: Autodesk Fusion 3d and Prusa i3

Post by slippyr4 » Sat Sep 02, 2017 9:15 pm

It is; you export STL files from fusion and then slice them in software such as slic3r or prusa control.
Self-built Prusa i3 MK2 clone
My things:
My Prusa firmware port for ramps & MKS :

User avatar
Posts: 40
Joined: Wed Jul 12, 2017 10:09 pm
Location: Rotterdam - The Netherlands

Re: Autodesk Fusion 3d and Prusa i3

Post by ido » Thu Sep 28, 2017 8:55 am

3d cad software and a 3d printer don't have a dependency with each other. Process is
3d cad --> 3d file (stl) --> slicing software --> gcode file --> 3d printer

One is for creating 3d models, the other for printing them. Ofcourse not all models can be printed well on a FDM printer, but this has nothing to do with the 3d cad programme

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest