Page 3 of 5

Re: Would like to see section for 3D YouTube vids.

Posted: Thu Jul 13, 2017 12:36 pm
by i3-guy
anet a8 upgrade with e3d
https://www.youtube.com/watch?v=PXE6tHo_y58

3D printing obi-wan light saber
https://www.youtube.com/watch?v=a2zPwqi_xYU

Re: Would like to see section for 3D YouTube vids.

Posted: Fri Jul 14, 2017 5:13 am
by i3-guy
Comparison of flexible materials
https://www.youtube.com/watch?v=7wMKp6q9ktE

Re: Would like to see section for 3D YouTube vids.

Posted: Fri Jul 14, 2017 8:50 pm
by i3-guy
Really nice intro to using the basics of Tinkercad to make a nail box holder
https://www.youtube.com/watch?v=UcZq6gPM_sk

Re: Would like to see section for 3D YouTube vids.

Posted: Sat Jul 15, 2017 12:57 pm
by i3-guy
Simple but effective Anet A8 upgrades:
-belt upgrade, frame upgrade, hot end
-shows a good printer if things go right
https://www.youtube.com/watch?v=ZjEED1xzq8k


--------------
Nice time lapse of building Anet A8, including a crack in the frame w/ Melamine frame upgrade.
Many co-workers ask me about the Anet A8 for a 1st printer.
I like this one as it shows possible road blocks that may be encountered which show the following
- power supply concerns
- Cracked frame
- Melted connections on controller

This vid includes everything a new person would want to consider including octopi
https://www.youtube.com/watch?v=37MsqteL3gk

-----
Dealing with 3D printed parts and thermal expansion using Fusion360 and Slic3r x-y compensation parameter (Cura calls this horizontal size expansion)
https://www.youtube.com/watch?v=TFsTo6cDmF8

3D tolerance torture test
https://www.youtube.com/watch?v=TYuLVN3YHw8

Explanation of how different Cura settings change your printing w/ the whistle on thingiverse
https://www.youtube.com/watch?v=6YZD6K7osco&t=51s

Explanation of advance settings in Cura
- Out / inner shell speeds
- Initial layer line width and thickness for extra bed adhesion
https://www.youtube.com/watch?v=JJpS2Ty3pqg


Using s3d to do multi-color prints even if you printers firmware does not support it like the MK2 does
https://www.youtube.com/watch?v=mh6lDpU3BkI

Re: Would like to see section for 3D YouTube vids.

Posted: Sat Jul 15, 2017 3:14 pm
by i3-guy
Cura per model settings w/ gradual infill
https://www.youtube.com/watch?v=0IzLPk_SLhE

Re: Would like to see section for 3D YouTube vids.

Posted: Sat Jul 15, 2017 10:50 pm
by kojote
Thinking about putting up all posts together as one :)

Re: Would like to see section for 3D YouTube vids.

Posted: Sun Jul 16, 2017 2:39 pm
by i3-guy
Yes, I think that would be great.

Anet A8 modified with the BL touch
https://www.youtube.com/watch?v=cJ1K7rZsdtY

Re: Would like to see section for 3D YouTube vids.

Posted: Mon Jul 17, 2017 1:50 am
by i3-guy
Using wood filament and PE slic3r to get multi color prints from a single nozzle by changing the nozzle temperature
https://www.youtube.com/watch?v=iT4hMpj-2TM

Re: Would like to see section for 3D YouTube vids.

Posted: Tue Jul 18, 2017 3:48 am
by i3-guy
Nice review of PLA blend that is like ABS but easier to print
https://www.youtube.com/watch?v=WXnu97jEVHk

If building a 3d printer, this $20 fully assembled oscope (DSO138) would be good to have once an issue is encountered:
https://www.youtube.com/watch?v=b5r-H_i1jzk
https://www.youtube.com/watch?v=x19kwG-wJRI
(tips on using this tool: https://syonyk.blogspot.com/2016/11/dso ... embly.html)
(flashing to enable more features:https://github.com/ardyesp/DLO-138)

How to setup Cura to draw with a marker and a 3D printer
https://www.youtube.com/watch?v=oP3jkoEJSa4
https://www.youtube.com/watch?v=sXb9NDqn1Mo

Steel I3 frame upgrade process. The frame seems a bit pricey, but may be useful if going to a wood frame
https://www.youtube.com/watch?v=YwZzp5UWWo0&t=3s

Using Fusion360 to make a metal part for motor
Designing, 3d Printing and Casting a Replacement Part for a Carburetor
https://www.youtube.com/watch?v=oMRCTwMCLaM

Re: Would like to see section for 3D YouTube vids.

Posted: Tue Jul 18, 2017 7:18 am
by i3-guy
Correctly Dimension your Sketches! CAD for Newbies with Fusion 360
https://www.youtube.com/watch?v=V8hLVILq3e4&t=210s

3D Printing can be made stronger through a number of tweaks
https://www.youtube.com/watch?v=1NzDr1YAb8Q

Making signs and logos
https://www.youtube.com/watch?v=myJi7mSFTYY

20 essential 3D printing tools
https://www.youtube.com/watch?v=rN34OQAghVU

Getting the most parts per printbed volume (http://hackaday.com/2017/06/28/the-3d-p ... g-problem/)
https://www.michaelfogleman.com/static/ ... 1498156017