Page 1 of 5

Best 3D Youtube Videos

Posted: Fri Jun 16, 2017 2:04 pm
by i3-guy
It would be cool to see a section for new videos that are 3D print related.

I have subscriptions, but many times there are old videos that are super useful but the channel is no longer active.

The content is still valuable and you will never stumble across them.

Re: Would like to see section for 3D YouTube vids.

Posted: Fri Jun 16, 2017 7:14 pm
by i3-guy
This is one of my favorite 3d printing vids.... using a brush kit to nickel plate a 3D print.

https://www.youtube.com/watch?v=ilWst2z ... e=youtu.be

Re: Would like to see section for 3D YouTube vids.

Posted: Fri Jun 16, 2017 8:08 pm
by oakdesign
i3-guy don't understand your request. Just the next section is called "YouTube", so already there.
As this place quite new brand new might take a few days until filled with content,

Regards Richard

Re: Would like to see section for 3D YouTube vids.

Posted: Fri Jun 16, 2017 9:29 pm
by kojote
I'll make you an offer - give me enough solid content for a month and you get a section and I move the content there :)

Re: Would like to see section for 3D YouTube vids.

Posted: Fri Jun 16, 2017 10:50 pm
by i3-guy
Having the YouTube section under meta means it is just a suggested topic vs. main regular topic, correct?

Re: Would like to see section for 3D YouTube vids.

Posted: Fri Jun 16, 2017 11:24 pm
by i3-guy

Re: Would like to see section for 3D YouTube vids.

Posted: Thu Jun 22, 2017 3:39 pm
by i3-guy
Here another to add to the collection.

3D Printing mistakes to avoid:
https://www.youtube.com/watch?v=aWg1nG2AbA8

Re: Would like to see section for 3D YouTube vids.

Posted: Sat Jun 24, 2017 3:36 am
by i3-guy
Great vid on what slicer variables to change speed of printing an object.
https://www.youtube.com/watch?v=vzVAyw2rRZ4&t=23s

Re: Would like to see section for 3D YouTube vids.

Posted: Sat Jun 24, 2017 3:46 am
by i3-guy
Good vid on tools you need to get into 3D printing:
https://www.youtube.com/watch?v=hqg1OWhWw3g

Cool test on 3D printed nylon gear in RC car
https://www.youtube.com/watch?v=PDU09B59YFQ

Good vid on hacking firmware on the Monoprice select mini
https://www.youtube.com/watch?v=T-o-ibGUEoA

Re: Would like to see section for 3D YouTube vids.

Posted: Sun Jun 25, 2017 12:50 pm
by i3-guy
Heat testing of different filaments after annealing
https://www.youtube.com/watch?v=vLrISrkg46g

Nice vid on getting OctoPrint running from scratch
https://www.youtube.com/watch?v=4A509rS1zOE

Vid on running Astroprint ( OctoPi for people who don't want to worry about router security settings)
https://www.youtube.com/watch?v=HRcPJNh3Rwk
https://www.youtube.com/watch?v=8iLAsUZPl1Q

Vid on useful things to print
https://www.youtube.com/watch?v=BPzwHltYtQs

vid using 3D parts at Volkswagen
https://www.youtube.com/watch?v=Z9_vIulHyfg

vid on using using tinkercad, including adding chamfers
https://www.youtube.com/watch?v=G7RjHgzJGA8

Huge eagle print on CR-10 (TLDR: Fast forward to 6:42)
https://www.youtube.com/watch?v=iyDOv4MfEPs

Pallette: Machine that splices filaments from different spools into 1 to change any printer into a multicolor printer.
https://www.youtube.com/watch?v=uecY5ikWdCI&t=26s

Nice build that combines CNC with 3D printer
https://www.youtube.com/watch?v=qJfYTv88YvI

Replacing Melzi board with a Smoothie
https://www.youtube.com/watch?v=QDNocu2MLpc